A selection of Mark's enamel work

Painting an Enamel Box Lid with a picture of Louis Armstrong

1 October 2013

Louis Armstrong miniature in enamel, after firing 6 of six
Miniature enamel painting of Louis Armstrong

I use on-glaze enamel paints and mix them with oil and turps substitute to get the right consistency. The turps thins the paint down and the oil acts as a binder. I'm currently using lavendar oil, although I'm finding this a bit thin for some purposes, like stippling.

The important thing is to minimize the number of firings. To do this I aim to cover the whole piece with paint for each firing, resisting the tempation to focus on just one area. Each firing typically takes about a minute at 800oC. In this case the enamel lid was quite thin so it only needed 50 seconds.

I recently painted a portrait of Louis Armstrong onto an enamel box lid. I took photos after each firing stage.

Here's after the first firing

Louis Armstrong miniature in enamel, after firing 1 of six

The important thing here is to size the painting up, get all the right proportions and not do anything that is irreversible! It's pretty much impossible to erase any mistakes with enamel. It's possible to paint over but it may take many firings to disguise the mistake.

Here's after the second firing:

Louis Armstrong miniature in enamel, after firing 2 of six

The aim here was to build up the shadow and establish some general colour. Also it's time to define the shapes a bit better.

After the third:

Louis Armstrong miniature in enamel, after firing 3 of six

This time it got over fired a bit, the colour is starting to fade a little although it's difficult to tell from the photo. No problem, though, in this case it added a little softness to the painting but I'll need to add more colour to compensate.

This is after the fourth:

Louis Armstrong miniature in enamel, after firing 4 of six

The trumpet is not quite there yet, but it's coming together overall.

Fifth:

Louis Armstrong miniature in enamel, after firing 5 of six

Just a bit more colour agian, especially in the background. For this I stippled the paint with a pad to give the dotted effect.

And finally the 6th firing:

Louis Armstrong miniature in enamel, after firing 6 of six

Here I finally got the trumpet the way I wanted it, it needed darkening at the front. The finished enamel box can be seen here.

The work