A selection of Mark's enamel work
I filed the top of the screw so it is flush with the top of the ellipsoid.
The die allowed me to make the ellipsoidal shape for the Chorister Medals

2019

Ellipsoidal Die

The ellipsoidal die, made from brass, for creating the curvature required for the Cloisonné Enamel Medal project

How it was made

Detailed dimensions for the design
I put my design down on paper to get a better feel for what …
Making a chuck holding circle
This is going to be a circular holding piece that can easily be grabbed …
The finished holding circle
The finished holding circle has a hole cut out for a screw to be …
Chuck holing circle with screw
Once the screw is inserted it is flush with the top.
Screw protruding from the other side
The screw has plenty of length.
Sizing up a piece of brass plate
The ellipsoid forming die has to be cut from solid brass. Here I'm sizing …
Putting the centre hole into the solid piece of brass
Putting the centre hole into the solid piece of brass.
The holding circle and the solid brass are screwed together
Once the hole has been tapped then the holding circle can be screwed into …
Putting a locking hole into the set-up.
Another screw needs to go in to lock the holding circle into place. The …
The locking bolt is put in
The hole is tapped in the solid piece of brass but widened in the …

Used for