A selection of Mark's enamel work
The Finished piece
The finished Cloisonné Amazon Frog

2017

Cloisonné Amazon Frog

This gallery shows the steps to making an cloisonné domed silver disc with an Amazon rainforest frog design. This is a similar method to what I used for making the cloisonné cabinet doorknobs , except, here, I'm experimenting a bit by soldering a border ring around the piece at the start.

Part of

Written about

How it was made

Initial Design for the Frog
I did a painting of a nice looking frog I found ( I've pinned …
Engraved Disc Placed Next to Design
The disc was first coated with Chinese White water colour and the design traced …
Silver Disc Engraved with Frog Design.
The silver disc is made from pure silver. It has been engraved with the …
Holding the finished engraving
Border Ring
I made this border ring from fine silver wire: First I fused together two …
Border Ring Soldered onto the Disc
The border ring is hard-soldered onto the disc
Layer of Fine Hard Enamel Fired In
I've sprayed a very fine layer of hard enamel onto the piece and fired …
Ready to fire wires onto design
The wires have been bent and put in place and the piece is ready …
Kiln Ready for Firing the Piece
The kiln is allowed to soak at 840°C for a while, ready to fire …
After the First Firing of the Wires
Here's what the piece looks like after firing-in the wires. The wires should be …

Used for